Authentic OEM 812 Hub Carrier in the 274635
Oct
Introduction
Welcome to the ultimate guide on sourcing and understanding the importance of genuine OEM Ferrari 812 parts. If you’re an enthusiast committed to preserving the authentic performance and value of your Ferrari, you’ve come to the right place. In this article, we’ll focus exclusively on high-precision, factory-spec Ferrari 812 components—specifically the Ferrari 812 Hub Carrier Complete with Axle Shaft Black & Silver OEM 274635, Ferrari 812 Front Wheelhouse Shield Kit Seat Black OEM 088688200, Ferrari 812 LH Front Lower ARM Silver OEM 235132, and Ferrari 812 Tyres (Pirelli) + Wheels Rims Set Bronze OEM 324158 324159.
In addition, we’ll compare these original Ferrari components with aftermarket alternatives, show why choosing OEM delivers reliability and peace of mind, and offer practical advice on installation, maintenance, and purchasing in the UAE.
Why OEM Parts Matter for Ferrari Other
Maintaining a Ferrari means more than just regular care—it demands absolute precision. Therefore, using OEM (Original Equipment Manufacturer) parts isn’t just a question of pride; it’s essential for performance and safety. Every component, from suspension arms to wheel rims, plays a vital role in the orchestration that makes a Ferrari 812 truly extraordinary.
Moreover, OEM parts guarantee authenticity. These aren’t just compatible pieces—they are designed, engineered, and tested by Ferrari for your specific model. As a result, you retain both the vehicle’s unique identity and the full benefit of manufacturer warranties.
Key OEM Parts Categories and Specifications
If you want your 812 to perform at its peak, each part needs to be tailored for the job. Let’s dive into the standout OEM components that keep your supercar at the front of the pack.
Ferrari 812 Hub Carrier Complete with Axle Shaft Black & Silver OEM 274635
The Ferrari 812 Hub Carrier Complete with Axle Shaft Black & Silver OEM 274635 is a marvel of automotive engineering. This part forms the backbone of the suspension and wheel assembly, supporting the wheel, housing bearings, and connecting both the lower and upper arms efficiently.
Furthermore, Ferrari engineers have optimized this carrier’s weight and strength using specialized alloys to withstand high cornering forces. That way, you experience razor-sharp handling and consistent reliability at every turn.
For a quick visual overview, see this external resource.
Ferrari 812 Front Wheelhouse Shield Kit Seat Black OEM 088688200
Meanwhile, the Ferrari 812 Front Wheelhouse Shield Kit Seat Black OEM 088688200 protects vital inner components from debris, moisture, and gravel impacts. This shield is not just about cleanliness; it ensures critical electronics and suspension mounts remain intact during spirited driving.
In addition, this exact-fit shield contours perfectly with the Ferrari 812’s bodywork, maintaining the car’s aerodynamic intent and comfort levels for both road and track adventures.
Ferrari 812 LH Front Lower ARM Silver OEM 235132
The Ferrari 812 LH Front Lower ARM Silver OEM 235132 is a cornerstone of the car’s front suspension architecture. It delivers precise control over wheel geometry and is manufactured to Ferrari’s extreme tolerances for performance stability.
Therefore, installing an OEM lower arm restores the original handling and ride comfort, unlike inconsistent aftermarket pieces which can alter alignment and increase tire wear.
Ferrari 812 Tyres (Pirelli) + Wheels Rims Set Bronze OEM 324158 324159
The Ferrari 812 Tyres (Pirelli) + Wheels Rims Set Bronze OEM 324158 324159 give power its perfect canvas. Specially designed for the 812, these forged alloys and factory Pirelli tyres ensure you get optimum grip, precise steering, and timeless Ferrari style.
Similarly, the original-fit ensures you avoid rubbing, vibrations, or TPMS issues—problems that commonly arise with non-OEM wheels.
- Suspension Parts: Lower arms, hub carriers, struts
- Body Panels: Wheelhouse shields, bumpers
- Wheels/Tyres: Factory alloys and high-performance tires
- Braking: OEM discs, pads, calipers
- Electronics: Sensors, TPMS modules
OEM vs Aftermarket: Why Original Wins
You might wonder: can you save by choosing an aftermarket part over genuine Ferrari? In contrast, saving on a part now often leads to far greater costs later. Let’s explore why OEM always emerges on top for a Ferrari supercar.
OEM parts undergo Ferrari’s strictest quality control, using advanced materials and measured to the micron for guaranteed tight tolerances. Aftermarket parts, however, can be mass-produced, varying in quality, fit, and finish.
Meanwhile, only OEM parts protect your original resale value and manufacturer warranty. If you install inauthentic components, you risk voiding both—never a risk with Dourado Auto Service‘s complete Ferrari range.
- Precision Engineering: Tighter tolerances, tested to Ferrari’s standards
- Warranty Protection: Safeguard factory coverage
- Performance: Retain original handling, braking, and acceleration
- Safety: Reduce risk of premature failures or compatibility issues
- Resale Value: Future buyers expect genuine Ferrari components
Therefore, for any major system—engine, suspension, or bodywork—OEM is the only rational choice.
If you’re curious about inventory, check our full Ferrari product listings for a wide selection of 95% new, original factory parts.
Installation Tips and Maintenance Best Practices
Correct installation is just as critical as part selection. Moreover, genuine Ferrari parts often come with detailed guides or torquing specifications. Therefore, always reference your service manual or consult authorized Ferrari technicians when installing:
- Prepare all tools and workspace before starting replacement.
- Never reuse bolts or bushings if the OEM guide suggests replacement.
- Torque all fasteners to Ferrari’s specs—over-tightening may damage parts, while under-tightening risks loosening.
- After assembly, conduct a wheel alignment or system diagnostic check.
- Always verify correct fitment with your Ferrari’s VIN before ordering parts.
Furthermore, regular checks after high-performance driving will catch issues like premature tire wear, misalignment, or minor cracks—address them using only OEM parts for continued peace of mind.
Where to Buy Genuine Ferrari Other Parts in the UAE
In the UAE, a region known for its passion for luxury supercars, you deserve only the best for your Ferrari. As a result, Dourado Auto Service stands out as the premier source for genuine Ferrari 812 components.
You can trust the provenance and quality of every Ferrari 812 Hub Carrier Complete with Axle Shaft Black & Silver OEM 274635, Ferrari 812 Front Wheelhouse Shield Kit Seat Black OEM 088688200, Ferrari 812 LH Front Lower ARM Silver OEM 235132, and Ferrari 812 Tyres (Pirelli) + Wheels Rims Set Bronze OEM 324158 324159. Similarly, our expert staff ensures you get fitment advice tailored for your vehicle, with prompt sourcing and support.
For broader choices, visit the Dourado Auto Service Ferrari parts shop and ensure every repair, upgrade, or maintenance step preserves your Ferrari at its finest.
Conclusion and Call to Action
In conclusion, using OEM parts like the Ferrari 812 Hub Carrier Complete with Axle Shaft Black & Silver OEM 274635, Ferrari 812 Front Wheelhouse Shield Kit Seat Black OEM 088688200, Ferrari 812 LH Front Lower ARM Silver OEM 235132, and Ferrari 812 Tyres (Pirelli) + Wheels Rims Set Bronze OEM 324158 324159 doesn’t just maintain your Ferrari’s performance—it protects your investment, safety, and driving pleasure.
Therefore, always insist on genuine parts and professional installation. For the most reliable source of Ferrari components in the UAE, reach out to Dourado Auto Service today and let your 812 shine with authentic, factory-spec excellence.
