Exclusive Free Delivery for the 20B9320600
Nov
Introduction
Owning a Ferrari is more than just driving; it’s about experiencing perfection in motion. When it comes to service and repair, nothing surpasses the peace of mind you get from brand-new original parts. For the discerning Ferrari enthusiast, the Ferrari 812 Rear Brake Caliper LH & RH Red OEM 20B9320600 20B9320500 represents a pinnacle of design and function.
However, not all components are created equal. The specific 20B9320600 and 20B9320500 calipers are not just an upgrade—they’re a necessity if you want reliability and maximum resale value.
Why OEM Parts Matter for Ferrari Other
Firstly, using OEM parts ensures precise fitment for your supercar. The Ferrari 812 Rear Brake Caliper LH & RH Red OEM 20B9320600 20B9320500 comes engineered to Ferrari’s exacting standards, guaranteeing you the perfect match every time.
Moreover, authentic parts like these preserve your vehicle’s warranty and safeguard its resale value. This is especially true for high-performance components found within Ferrari’s brake system.
In addition, genuine Ferrari OEM components undergo extensive quality control. Thus, you avoid costly errors that could result from using inferior third-party alternatives.
Key OEM Parts Categories and Specifications
For the Ferrari 812, key part categories that demand attention include brakes, engine, suspension, body panels, and electronic modules.
The standout, however, is most definitely the braking system. Specifically, the Ferrari 812 Rear Brake Caliper LH & RH Red OEM 20B9320600 20B9320500 is engineered from forged aluminum alloy, providing unmatched stopping power and fade resistance.
Furthermore, the calipers receive an exclusive multi-layer red finish—protecting them from corrosion while giving your Ferrari that striking, factory-fresh look.
- Engineered from high-strength, lightweight forged materials.
- Precision tested by Ferrari engineers to ensure uncompromised fit and performance.
- Distinctive Ferrari factory red finish for authenticity and corrosion resistance.
- OEM part numbers 20B9320600 (left, LH) and 20B9320500 (right, RH) for exact match and documentation.
For a quick visual overview, see this external resource.
Meanwhile, correct OEM fitment means there’s no need to modify or compromise other hydraulic or electronic systems during installation. Similarly, Ferrari’s certified calipers ensure rotor and pad compatibility.
OEM vs Aftermarket: Why Original Wins
In contrast to generic alternatives, only Ferrari OEM calipers guarantee the exact engineering tolerances your 812 Superfast or GTS expects.
However, many buyers get drawn toward cheaper, aftermarket calipers that look similar. The reality? These alternatives often use inferior metals, subpar paint, and lack Ferrari’s proprietary anti-corrosion treatment.
Consequently, using non-OEM brake parts can compromise safety, void warranties, and reduce the value of your car at resale.
Therefore, you always want to invest in genuine factory components—especially when performance and heritage are at stake.
- OEM calipers have the original Ferrari logo and branding for authentication.
- Aftermarket parts are not tested for Ferrari’s unique braking systems and may cause issues.
- Ferrari OEM guarantees compatibility with brake pads, rotors, and sensors.
- Retaining all-OEM hardware supports full service history, documented by main dealers.
Furthermore, ordering genuine allows you to benefit from expert advice and ongoing support from trusted Ferrari parts specialists in the UAE such as Dourado Auto Service Ferrari parts shop.
Installation Tips and Maintenance Best Practices
For best results, always have your Ferrari 812 Rear Brake Caliper LH & RH Red OEM 20B9320600 20B9320500 installed by certified Ferrari technicians.
Moreover, proper installation requires clean workspaces and specialized torque tools to meet Ferrari’s standards.
In addition, technicians should replace brake fluid and check pad thickness whenever installing new calipers.
Meanwhile, consult your service manual for torque specs and bleeding procedures. This ensures optimal brake response and safety.
Thus, periodic inspection of calipers (for finish, leaks, or abnormal wear) keeps your braking system in top condition.
Furthermore, always use genuine brake pads and rotors to maximize the calipers’ lifespan and maintain Ferrari performance.
Where to Buy Genuine Ferrari Other Parts in the UAE
For Ferrari connoisseurs in the UAE, sourcing OEM parts is easier than you think. The team at Dourado Auto Service Ferrari product listings offers a full range of hard-to-find Ferrari 812 parts and accessories—with exclusive free delivery options available.
Similarly, you can directly order the Ferrari 812 Rear Brake Caliper LH & RH Red OEM 20B9320600 20B9320500 through their detailed product pages, enjoying the confidence that comes from full warranty support and aftersales care.
Moreover, OEM part documentation and official invoicing support your service records and protect the future value of your Ferrari.
Conclusion and Call to Action
If you’re passionate about preserving the authenticity, reliability, and value of your Ferrari 812, only 95% brand new OEM components will do. Why risk aftermarket uncertainty?
Therefore, choose the Ferrari 812 Rear Brake Caliper LH & RH Red OEM 20B9320600 20B9320500 for the ultimate peace of mind. Experience the exclusive feel and performance Ferrari intended—while protecting your supercar’s future with every drive.
Ready to order, or need expert advice? Head over to Dourado Auto Service Ferrari parts inventory today and give your prized 812 the care it truly deserves.
