Direct-fit in the Best 812 Front Upper LH 235136
Oct
Introduction
Own a Ferrari 812? Then you know every part matters. Keeping your V12 supercar in mint condition is a top priority. However, not all car parts are created equal. For those committed to your Ferrari’s best, choosing OEM—or Original Equipment Manufacturer—parts such as the Ferrari 812 Front Upper LH Arm Silver OEM 235136 guarantees top-tier performance, safety, and authentic Ferrari driving experience.
Moreover, sourcing the right OEM components is crucial, whether you need a new shock absorber or a precision-engineered silencer. Therefore, let’s explore some of the most essential factory-fitted Ferrari 812 parts—and why they’re your only real choice for excellence.
Why OEM Parts Matter for Ferrari Other
Ferrari 812 supercars combine brute strength and Italian sophistication. However, even the smallest mechanical flaw or off-spec component can diminish that magic. Similarly, using non-original suspension, undertray, or exhaust parts can risk the factory-tuned balance Ferrari engineered so meticulously.
Therefore, when you opt for genuine parts like the Ferrari 812 Rear Shock Absorber LH & RH Black & Silver OEM 238468, you restore ride quality, handling, and warranty coverage as intended at Maranello.
In addition, authentic OEM components ensure long-term reliability. After all, Ferrari designs each part to harmonize with their advanced drivetrain, electronics, and chassis—right down to the Ferrari 812 Front Flat Undertray Section Bumper Black OEM 795722.
Key OEM Parts Categories and Specifications
Let’s dig into several must-have OEM parts that keep your Ferrari 812 performing and looking its absolute best.
1. Ferrari 812 Front Upper LH Arm Silver OEM 235136
This direct-fit front upper left-hand control arm (OEM 235136) plays a crucial role in the 812’s double-wishbone suspension system. Specifically crafted for the model, it ensures optimal geometry, incredible steering response, and durability under extreme loads.
For example, Ferrari anodizes this arm in a factory silver finish to fight corrosion and maintain a lasting showroom look.
2. Ferrari 812 Rear Shock Absorber LH & RH Black & Silver OEM 238468
Meanwhile, these Ferrari-tuned rear dampers use advanced internal valving for perfect ride balance. Both left and right shocks (OEM 238468) come in the original black and silver, matching Ferrari’s strict appearance and technical standards.
As a result, you guarantee stable high-speed driving, precise corner handling, and maximum comfort—just as Ferrari intended.
3. Ferrari 812 Left & Right Rear Silencer Silver OEM 337500 337499
The Ferrari 812 is all about sound and speed. Thus, only genuine left and right rear silencers (OEM 337500 and 337499) can replicate the original exhaust note. They retain the signature V12 roar, crafted with precise baffle construction and Ferrari’s signature silver finish—essential for maintaining emission specs and that true Ferrari timbre.
4. Ferrari 812 RH Lower Rear Arm Complete Silver OEM 314776
For rear-end stability, the complete right-hand lower rear arm (OEM 314776) ensures the proper rear wheel alignment and support under hard acceleration. In addition, its original silver finish fits seamlessly with your 812’s undercarriage aesthetics.
5. Ferrari 812 Front Flat Undertray Section Bumper Black OEM 795722
This front undertray (OEM 795722) helps direct airflow beneath the car for optimal cooling and downforce. Crafted in robust black composite, its precise edge contours aid aerodynamics as designed in Maranello’s wind tunnel. Installation ensures your Ferrari’s underbody remains fully protected and in top aerodynamic condition.
- Complete authenticity and continuity with Ferrari’s engineering intent
- Perfect compatibility with the Ferrari 812 (and related Ferrari Other models as specified)
- Full preservation of new car warranty and insurance coverage
- High resale value—original parts boost collector interest and future sales
- Matched durability and finish quality for show-level appearance
OEM vs Aftermarket: Why Original Wins
Choosing between OEM and aftermarket? In the luxury supercar world, there’s no real debate.
For example, aftermarket parts may claim to fit, but they often sacrifice Ferrari’s precision tolerances, unique materials, or finish quality. Consequently, improper fit can lead to premature wear, handling quirks, or electrical gremlins.
Similarly, using non-OEM exhausts or suspension components may void warranty protection and diminish resale value. Many Ferrari 812 buyers, collectors, and drivers demand full originality.
Thus, whether it’s a Ferrari 812 Front Upper LH Arm Silver OEM 235136 or a Ferrari 812 Rear Shock Absorber LH & RH Black & Silver OEM 238468, sticking to new OEM Ferrari parts is your best path for integrity, performance, and brand authenticity.
- Engineered specifically for your Ferrari 812 or Ferrari Other—no guesswork.
- Tested and certified at the same Ferrari production standards.
- Guaranteed fit: bolt on and drive, with no modifications needed.
- Maintain full Ferrari warranty coverage and support.
- Retain your best resale value for years to come.
Installation Tips and Maintenance Best Practices
Proper installation of genuine Ferrari parts is straightforward but still deserves care and attention. For instance, always clean mounting surfaces and use prescribed torque specs when fitting components like the Ferrari 812 Front Upper LH Arm Silver OEM 235136 or Ferrari 812 RH Lower Rear Arm Complete Silver OEM 314776.
Meanwhile, match orientation marks and double-check fastener threads—never force aftermarket bolts or parts as it may damage threads or mounting points. In addition, align exhaust systems, such as the Ferrari 812 Left & Right Rear Silencer Silver OEM 337500 337499, using factory brackets for a rattle-free, vibration-resistant fit.
For a quick visual overview, see this external resource.
Furthermore, after installing sensitive undertray or aerodynamic parts like the Ferrari 812 Front Flat Undertray Section Bumper Black OEM 795722, ensure all mounting clips are engaged for maximum downforce benefits.
Thus, routine maintenance should always use OEM-approved hardware, lubricants, and cleaning agents on original surfaces to preserve finish and function. Similarly, keeping records of all OEM part swaps and service helps support warranty claims or boost value during future sales.
Where to Buy Genuine Ferrari Other Parts in the UAE
Your best source for Ferrari 812 and Ferrari Other original parts in the UAE is a trusted Ferrari-focused service center with direct access to factory inventory. Dourado Auto Service is one such destination, providing genuine and 95% brand new OEM stock—including the Ferrari 812 Front Upper LH Arm Silver OEM 235136 and the entire list of exclusive components referenced here.
In addition, you can browse their Ferrari-specific catalog on this product listing page for current stock and detailed part specs.
Meanwhile, Dourado’s specialists can help with fitment verification, technical queries, or professional installation services—critical when working on such rare and valuable machinery.
Similarly, contacting expert UAE-based Ferrari suppliers ensures you always receive direct-fit OEM parts, fully compatible with your prized 812.
Looking for more choices or related Ferrari Other parts? Check the complete range at Dourado Auto Service Ferrari Parts.
Conclusion and Call to Action
Your Ferrari’s performance, appearance, and value ride on the details. Choosing original, mint condition parts such as the Ferrari 812 Front Upper LH Arm Silver OEM 235136, Ferrari 812 Rear Shock Absorber LH & RH Black & Silver OEM 238468, Ferrari 812 Left & Right Rear Silencer Silver OEM 337500 337499, Ferrari 812 RH Lower Rear Arm Complete Silver OEM 314776, and Ferrari 812 Front Flat Undertray Section Bumper Black OEM 795722 keeps your supercar in original, best-performing shape.
For total peace of mind, insist on direct-fit OEM Ferrari parts. Contact Dourado Auto Service today to safeguard the value, safety, and legendary driving experience of the world’s finest V12 Grand Tourer.
