Reliable Brand New 812 ABS Sensor in the 336026
Oct
Introduction
For passionate Ferrari owners, every detail matters—especially original parts. The 812 Superfast is a legend, and keeping it factory-perfect ensures its value, reliability, and jaw-dropping performance remain uncompromised. However, many overlook the significance of select OEM parts like the Ferrari 812 ABS Sensor Red OEM 336026, Ferrari 812 RH Centre Flat Undertray Section Black OEM 88084000, Ferrari 812 RH Lower Rear Arm Complete Silver OEM 314776, and the Ferrari 812 Left & Right Rear Silencer Silver OEM 337500 337499.
As a result, this guide focuses on these specific OEM components for the Ferrari 812, revealing why only dealer-issued, brand new factory parts deserve a place in your V12 icon. You’ll find practical insights about specifications, installation tips, and expert advice to keep your supercar authentic and at its peak.
Why OEM Parts Matter for Ferrari Other
Choosing original equipment manufacturer (OEM) parts for a Ferrari 812 is not just about fit—it’s about preservation. Only OEM components match Ferrari’s original build quality, ensuring precise integration with complex modern systems.
For example, installing a non-OEM ABS sensor may throw off delicate electronic calibrations, undermining performance and safety. Meanwhile, replacing exhaust or suspension components with inferior replicas can void warranties and erode resale value—not to mention degrade the 812’s legendary driving feel.
In addition, Ferrari crafts each OEM part to strict tolerances using premium materials. Therefore, only genuine parts guarantee the longevity, driving precision, and collector pedigree that set the 812 apart from lesser automobiles.
Key OEM Parts Categories and Specifications
Advanced Braking: ABS Sensor Red OEM 336026
The Ferrari 812 ABS Sensor Red OEM 336026 stands at the heart of your braking safety net. Ferrari’s ABS electronics rely on ultra-precise input from this component, which constantly monitors wheel speed variations, crucial for advanced traction and anti-lock systems.
Furthermore, only a dealer-issued, brand new ABS sensor ensures low resistance, fast response, and robust insulation against the extreme heat and vibration experienced by the 812’s race-derived setup. Therefore, trusting aftermarket options for this is a gamble nobody should risk with a Ferrari of this caliber.
Body Integrity: RH Centre Flat Undertray Section Black OEM 88084000
The Ferrari 812 RH Centre Flat Undertray Section Black OEM 88084000 is more than just a cover. As a structural body panel, it provides aerodynamic efficiency while protecting vital undercarriage elements from road debris and heat.
Similarly, only the OEM undertray fits seamlessly, guaranteeing the car’s aerodynamic profile isn’t compromised. Each factory panel aligns to within millimeters, affecting downforce and vehicle balance at high speeds.
Precision Suspension: RH Lower Rear Arm Complete Silver OEM 314776
Suspension precision is vital for a supercar. The Ferrari 812 RH Lower Rear Arm Complete Silver OEM 314776 is a multi-link component engineered for specific load paths, weight, and compliance.
For example, Ferrari OEM rear arms seamlessly integrate with factory bushings and mounting points. Non-original arms—no matter how well made—can throw off alignment, causing rapid tire wear or unpredictable handing.
Authentic Sound: Left & Right Rear Silencer Silver OEM 337500 337499
The Ferrari 812 Left & Right Rear Silencer Silver OEM 337500 337499 is responsible for the signature V12 howl, tuned at Maranello to perfection.
In contrast, most aftermarket silencers may amplify—or mute—the sound in unwanted ways. OEM exhaust sections ensure exact fit, optimal flow, and the right blend of bark and refinement.
- ABS Sensor Red: Engineered for precision braking
- Undertray Section: Maintains aerodynamic balance
- Rear Arm: Guarantees suspension geometry
- Rear Silencer: Delivers authentic Ferrari acoustics
OEM vs Aftermarket: Why Original Wins
Genuine Ferrari OEM parts guarantee the right material quality, fitment, and performance—maintaining the brand’s engineering intent.
Meanwhile, aftermarket parts may appear similar but often lack the rigorous testing and quality control. For example, alloy differences or slight dimension inaccuracies can result in increased wear or system failure over time.
Furthermore, OEM parts retain your warranty protection. Any deviation from factory parts can lead to warranty denials or costly rework by authorized dealers.
Consequently, original components help preserve the vehicle’s value for collectors and future buyers. Documented OEM part usage adds peace of mind and maximizes market desirability, especially in the discerning supercar segment.
- Higher reliability and safety
- Exact compatibility with original engineering
- Resale value protection
- Retention of factory warranty
- Brand authentication for collectors
Installation Tips and Maintenance Best Practices
When installing parts such as the Ferrari 812 ABS Sensor Red OEM 336026, always use a qualified technician or Ferrari-certified service center.
For example, proper torque settings and recalibration steps are essential after replacing the ABS sensor. Likewise, ensure clean mounting surfaces and sealed electrical connections to prevent water ingress or corrosion—common issues with generic alternatives.
Moreover, body panels like the Ferrari 812 RH Centre Flat Undertray Section Black OEM 88084000 require perfect alignment. Rushing these steps can cause aerodynamic imbalance at high speeds.
Similarly, for suspension jobs like the Ferrari 812 RH Lower Rear Arm Complete Silver OEM 314776, always follow OEM torque values and alignment basics. Do not skip a professional test drive and post-installation check.
As for silencers, fitting an original Ferrari 812 Left & Right Rear Silencer Silver OEM 337500 337499 keeps exhaust flow and emissions within precise factory specifications. Aftermarket pipes might need illegal tweaks and will often fail emissions inspections.
Where to Buy Genuine Ferrari Other Parts in the UAE
You don’t need to compromise. To source genuine and reliable Ferrari OEM parts in the UAE, trust authorized suppliers with direct factory sourcing.
Additionally, Dourado Auto Service Ferrari stock listings offer a comprehensive range for the 812 and other models.
If you’re seeking hard-to-find items—like original silencers, undertrays, or ABS electronics—partnering with a provider who guarantees authenticity and provenance is essential.
For further peace of mind, always request part-number verification and brand new condition documentation before purchasing. Consequently, your Ferrari will continue to perform—and sound—like the masterpiece it was born to be.
For a quick visual overview, see this external resource.
Conclusion and Call to Action
When you invest in a Ferrari 812, every part counts. Therefore, choose only OEM, brand new parts such as the Ferrari 812 ABS Sensor Red OEM 336026, Ferrari 812 RH Centre Flat Undertray Section Black OEM 88084000, Ferrari 812 RH Lower Rear Arm Complete Silver OEM 314776, and Ferrari 812 Left & Right Rear Silencer Silver OEM 337500 337499 for every repair, upgrade, or restoration.
For example, buying from trusted, authorized stockists like Dourado Auto Service not only protects your investment but also assures you of unrivaled driving enjoyment, safety, and the true Ferrari experience.
Don’t let your pride and joy be compromised by generic or used components. Experience the difference: superior engineering, fit, and performance are always built into dealer-issued, reliable Ferrari OEM parts. Safeguard your automotive legacy today!
