No Wait 812 Rear Pad Set Black OEM 9491700

Introduction

For those who cherish the thrilling roar and exquisite curves of Ferrari’s V12 flagship, the highest standard of excellence is non-negotiable. The Ferrari 812 Rear Pad Set Black OEM 9491700, Ferrari 812 Wiring Harness Driver Door Left & Right OEM 860375 860378, Ferrari 812 Rear Bumper Yellow OEM 89335300, Ferrari 812 Front Dam Left & Right Black, and Ferrari 812 LH Front Lower ARM Silver OEM 235132 define not just a vehicle but the uncompromising pursuit of showroom-perfect performance.

For example, using genuine OEM parts ensures your supercar delivers the factory-intended dynamism and prestige.

Similarly, keeping your Ferrari equipped with 95%+ brand new OEM components isn’t just about looks – it guards the car’s performance, safety, warranty, and resale value.

Why OEM Parts Matter for Ferrari Other

In contrast to generic options, Ferrari’s meticulously engineered OEM parts elevate the entire ownership experience.

For the Ferrari 812, every component – down to the smallest harness or brake pad – affects how the car feels, drives, and sustains value over time.

Therefore, authenticity is king in the world of Italian exotics.

Genuine OEM parts are specifically crafted for your individual model, designed to match the car’s unique geometry, electronics, and tolerances.

Consequently, you avoid fitment headaches, electrical gremlins, or performance compromises that plague aftermarket solutions.

Key OEM Parts Categories and Specifications

Meanwhile, let’s dive into five critical OEM components that set the Ferrari 812 apart on the road and in the showroom.

Braking System: Ferrari 812 Rear Pad Set Black OEM 9491700

The rear brake pads are the heartbeat of your stopping power.

This factory set offers unrivaled grip, wear resistance, and heat dissipation, precisely aligned with the Ferrari’s carbon-ceramic rotors and advanced ABS.

Moreover, you’ll notice consistent, fade-free performance – a necessity for spirited drives or track sessions.

These pads feature low-dust composition to minimize wheel soiling and preserve that like-new gloss.

Electrical/Electronics: Ferrari 812 Wiring Harness Driver Door Left & Right OEM 860375 860378

Ferrari’s doors are more than just entryways; they’re sophisticated hubs managing window lifters, mirrors, alarm sensors, and central locking.

In addition, using OEM wiring harnesses for both left and right doors protects signal integrity and eliminates the risk of short-circuits or module failures.

Thus, you maintain full factory function and avoid the electrical gremlins sometimes triggered by spliced or subpar replacement harnesses.

Body & Aesthetics: Ferrari 812 Rear Bumper Yellow OEM 89335300

The rear bumper is the crowning jewel of the 812’s distinctive rear design.

This OEM yellow bumper comes pre-painted to match Ferrari’s iconic giallo exteriors, with perfect mounting points and integrated sensors.

Consequently, collision restoration or customization is seamless, and structural safety is preserved.

Suspension & Handling: Ferrari 812 Front Dam Left & Right Black

Chassis dampers (dams) are essential for controlling roll and maximizing road feedback.

Moreover, these black OEM units guarantee precise shock absorption and ride quality as engineered by Ferrari, preserving dynamic balance across both axles.

Using off-spec alternatives can disrupt handling or trigger dashboard error messages.

Suspension Arm: Ferrari 812 LH Front Lower ARM Silver OEM 235132

This lower arm, forged in silver alloy, connects your wheel to Ferrari’s advanced adaptive suspension.

For example, the arm is built to strict tolerances, ensuring geometry remains unchanged—even under huge cornering loads.

OEM construction protects tire wear, alignment, and high-speed stability.

• Precision fitment preserves handling and safety.
• OE quality paint and finish match the factory show-car look.
• All mounting points and sensor brackets mirror original specs.
• Compatibility guaranteed with corresponding 812 models.

OEM vs Aftermarket: Why Original Wins

Furthermore, the temptation to go aftermarket can be strong.

However, let’s compare key differences that make OEM simply superior for the Ferrari 812.

1. Fitment and Compatibility: Only Ferrari OEM parts guarantee “plug-and-play” installation.
2. Engineering and Safety: Original Ferrari components meet the marque’s rigorous engineering standards for durability, crash safety, and longevity.
3. Warranty Protection: Using OEM parts ensures your Ferrari’s warranty remains intact, avoiding dealer disputes if an issue arises.
4. Resale Value: Documentation of like-new OEM parts boosts resale credentials with collectors and used car buyers.
5. Authenticity: Every Ferrari enthusiast knows real value means “Ferrari inside and out.”

Meanwhile, aftermarket parts—while sometimes less costly—can compromise alignment, electronics, and even void extended warranties.

Therefore, original always wins for peace of mind, prestige, and ultimate driving satisfaction.

For a quick visual overview, see this external resource.

Installation Tips and Maintenance Best Practices

Thus, even the best part needs proper handling.

If you’re handy, you can install some components (such as pads) with standard tools, but always consult Ferrari service manuals.

For advanced electronics or chassis work, rely on authorized Ferrari technicians with the software and expertise needed for calibration and setup.

Meanwhile, every upgrade or replacement deserves careful documentation—keep invoices, part numbers, and installer notes together for warranty and resale icing.

Clean brake dust off new pads promptly to keep the finish showroom-like.

Inspect wiring connections for moisture and torque all suspension bolts to spec.

Check electronic error messages or sensor alerts after any installation and address promptly, often a sign of connection or configuration issues.

Where to Buy Genuine Ferrari Other Parts in the UAE

If you want direct access to genuine Ferrari OEM parts in the UAE, always work with trusted specialist suppliers.

Dourado Auto Service stocks a vast range of authorized, new-old-stock parts—from brakes and wiring to bumpers, body, and suspension.

Therefore, browse their in-stock Ferrari 812 inventory or search by specific part number to guarantee authenticity and fit.

Similarly, their expert advisors can answer any compatibility or installation queries—keeping your supercar on the road, and in the spotlight.

For the ultimate selection, check the broader Ferrari product listings—covering everything from performance tuning to preservation for collectors.

Conclusion and Call to Action

In summary, your Ferrari 812 deserves the best: precision-engineered, like-new OEM components that preserve the brand’s legacy and your vehicle’s spirit.

Whether you need the Ferrari 812 Rear Pad Set Black OEM 9491700, Ferrari 812 Wiring Harness Driver Door Left & Right OEM 860375 860378, Ferrari 812 Rear Bumper Yellow OEM 89335300, Ferrari 812 Front Dam Left & Right Black, or Ferrari 812 LH Front Lower ARM Silver OEM 235132, insist on real Ferrari parts.

Moreover, partner with recognized suppliers for installation and support.

Your Ferrari will thank you with maximum performance, lasting value, and unrivaled enjoyment every time you start that legendary V12.