Introduction
Every garage-kept Ferrari deserves meticulous care. That dedication demands only reliable, guaranteed fitment parts straight from Maranello’s factories. If you drive the ultimate V12, a Ferrari 812 Superfast or GTS, OEM excellence is a must to unlock pure performance and preserve your supercar’s legacy. This guide explores the Ferrari 812 Rear Pad Set Black OEM 9491700, Ferrari 812 LH & RH Tailpipes With Mesh Titanium OEM 89381000 89381100, and Ferrari 812 ABS Sensor Red OEM 336026—three components engineered for factory fit, ultimate peace of mind, and true Ferrari performance.
For a quick visual overview, see this external resource.
Why OEM Parts Matter for Ferrari Other
Owning a Ferrari 812 is all about authenticity and pedigree. Anything less than OEM brings risk—to your driving experience, wallet, and the car’s value. Buying certified original parts ensures precise engineering, consistent material quality, and full brand warranty coverage.
Moreover, only OEM components like the Ferrari 812 Rear Pad Set Black OEM 9491700 or Ferrari 812 ABS Sensor Red OEM 336026 maintain the soul and signature feel of your prancing horse.
In addition, every maintenance book, Ferrari Classiche inspection, and resale evaluation favors genuine parts usage. Skipping originals can jeopardize your long-term investment and even void crucial warranty protection.
Key OEM Parts Categories and Specifications
Braking: Ferrari 812 Rear Pad Set Black OEM 9491700
First, consider the supreme importance of braking on a 789-horsepower GT. The Ferrari 812 Rear Pad Set Black OEM 9491700 was engineered to precise tolerances—modulated for F1-worthy stopping with smooth, fade-resistant performance.
Similarly, these pads offer the exact friction characteristics calibrate for the 812’s carbon-ceramic rotors. They minimize dust, optimize heat transfer, and maintain the pedal feel Ferrari drivers expect at any speed, on road or track days.
Exhaust: Ferrari 812 LH & RH Tailpipes With Mesh Titanium OEM 89381000 89381100
Meanwhile, the 812’s titanium tailpipes (LH and RH) with intricate mesh (OEM 89381000 89381100) serve more than just functional exhaust routing. The unique titanium alloy offers featherweight strength, corrosion resistance, and dissipates heat far better than conventional steel.
Furthermore, the mesh work channels airflow to enhance that unmistakable Ferrari V12 growl, with subtle harmonics only the factory achieves. Each system is precision-fit to the chassis, meaning it slides into place perfectly and stays rattle-free for years.
Safety & Electronics: Ferrari 812 ABS Sensor Red OEM 336026
Finally, the Ferrari 812 ABS Sensor Red OEM 336026 governs your braking confidence. It constantly relays wheel speed data to the onboard computer—activating the anti-lock system in milliseconds for secure stopping, especially in slick or high-speed situations.
Consequently, using genuine sensors means you avoid false readings, system errors, and maintain complete compatibility with Ferrari’s cutting-edge stability tech. Reliability, safety, and confidence—all built-in.
- Factory-matched fit and finish
- Materials that meet Ferrari’s exacting standards
- Engineered for maximum performance and longevity
- Protects car’s originality and value
- Keeps warranty intact
OEM vs Aftermarket: Why Original Wins
Many aftermarket options claim to deliver Ferrari-grade results—but rarely match the original’s nuances. While some non-OEM pads or sensors may appear similar, they often lack the heat tolerance, noise insulation, and strict QC of factory parts.
For example, only the Ferrari 812 Rear Pad Set Black OEM 9491700 comes with the friction material and exact thickness for carbon-ceramic rotors, stopping premature wear and squeal.
In contrast, even high-end aftermarket exhaust tips rarely match Ferrari’s mesh-titanium artistry or connect as seamlessly. Sub-par sensors can yield dashboard warnings and disrupt the refined ABS calibration unique to the 812.
Thus, trusting the original part guarantees you get what Maranello’s engineers intended—nothing less.
Installation Tips and Maintenance Best Practices
- Always verify OEM part numbers before ordering.
- Install pads or sensors with proper torque settings detailed in your Ferrari manual.
- When replacing exhaust pipes, allow the vehicle to cool and use new gaskets for tight sealing.
- Reset onboard diagnostics after sensor installations for proper system recognition.
- Track usage? Inspect brake pads regularly and replace them before they wear to critical thickness.
Moreover, always install Ferrari OEM components in a dust-free, well-lit workspace. In addition, use original fasteners and clips—never mix in generic parts.
Consequently, periodic inspection and prompt replacement with genuine parts such as the Ferrari 812 ABS Sensor Red OEM 336026 ensures that all your safety systems respond precisely as Ferrari intended.
Where to Buy Genuine Ferrari Other Parts in the UAE
Genuine parts selection matters just as much as any tune or detail. For owners in the UAE, trust the specialists: Dourado Auto Service brings authentic, 95% brand new and OE Ferrari 812 components straight to your garage.
Meanwhile, their inventory covers rear brake pads, titanium mesh tailpipes, ABS sensors, and dozens more 812 systems. Each item comes with documentation, so you know it’s not just a part—but a piece of the Ferrari legacy.
For the discerning enthusiast seeking additional options or advice, visit their product listing page for stock updates.
Conclusion and Call to Action
In summary, nothing replaces original Ferrari parts when ultimate performance, safety, and value matter most. The Ferrari 812 Rear Pad Set Black OEM 9491700, Ferrari 812 LH & RH Tailpipes With Mesh Titanium OEM 89381000 89381100, and Ferrari 812 ABS Sensor Red OEM 336026 exemplify how factory engineering preserves the powerful spirit of your machine.
Therefore, invest in peace of mind—choose only OEM. For a tailored fit, expert advice, or to explore more 812 components, connect with your trusted Ferrari specialist in the UAE today.